Anti-Twist Wire Rope Gripper Come Along Clamp
High strength aluminum alloy forging die is used as pulling plate and high strength alloy steel as jaw. The come along clamp is used to hold the unfolded wire or ground wire and optical cable after the completion of stringing operation or tension operation, so as to complete relevant operation on the line. According to the use, conductor come along clamp, ground wire come along clamp, optical cable come along clamp and wire rope come along clamp are classified.
After the come along clamp holds the ground wire, the tension is applied to the pull ring, and the sliding shaft of the pull ring slides in the body wire slot, and drives the connecting plate, and the movable jaw seat rotates accordingly. Because the other end of the movable jaw seat is hinged firmly with the jaw, when rotating, the movable jaw is forced to press down along the pin shaft, and the cable is pressed on the fixed jaw seat. The greater the tension on the pull ring, the greater the downward pressure on the movable jaw, so as to ensure that the ground wire is tightly clamped by the movable jaw and the fixed jaw.
| Model | Rated load | Applicable anti twist wire rope diameter | Weight |
| SKDD-1 | 50kN | 11-15mm | 7kg |
| SKDD-2 | 70kN | 16-18mm | 8kg |
| SKDD-3 | 120kN | 19-22mm | 11.6kg |
| SKDD-4 | 120kN | 22-24mm | 11.6kg |
| SKDD-5 | 200kN | 26-30mm | 23.5kg |
ONEREEL is specialized in the design and manufacture Steel Wire Spools, Plastic Wire Spools, Stainless Steel Spools, Warp Knitting Beam, Cable Drum Stand, Corrugated Wire Spool, Collapsible Cable Reel, customer spool , Aluminum Spool , Punching Wire Spool, Skeleton Cable Reel, Pulley Block , Hose Reel , Nylon Spool , Yarn Bobbin , and Flat Wire Spool in the industry since 1991. All of our Customer Spool and Wire Carrier are engineered and manufactured in our 120,000 square foot state-of-the-art manufacturing plant located in Ningbo, Zhejiang.
Customer Visit
Factory Exhibition
Packing&Shipping
Certification Authority
FAQ
Q: Can I get samples?
A: According to spool model and material, we will advise.
Q: How long is the sample LEAD TIME?
A: For existing samples, it takes 2-3 days. If no stock, we will advise lead time.
Q: Can you develop new products?
A: Yes, we have new products developing ability and we are good at developing new mold.
Q: How much is the freight charge?
A: It depends on spool package volume, if small quantity, volume and urgent goods,
we may advise FEDEX or other couriers' charge for your check.
If volume bigger and by seaway suitable, we provide FOB or CIF price to you.
Q: What format of the file do you need if I want my own design?
A: We have our own mound workshop and can provide spool or other plastic product developing and injection service.
Contact Now
