Cable Roller

Model No. : 21171,21181,21191

Straight Line Cable Ground Roller Cable Ground Roller (Cast Aluminum Support) Our cable ground roller comes with the cast aluminum support. The model with 'N' refers to the nylon roller, while the other presents the aluminum roller. Product

 Click for details

Model No. : 21281~21283

Edge Mount Manhole, Pithead Entry Roller This Edge Mount Manhole Entry Roller, corner mount Cable Roller rserves to protect the cable with its maximum diameter of 80mm as well as the pulling rope at the cable pithead. Our product is only required to...

 Click for details

Model No. : 21222

Tri-Rollers Corner Ground Roller

 Click for details

Model No. : 21221~21224

Triple Drum Corner Cable Roller Triple Drum Corner Cable Roller, three wheel cable roller, and 3 drum corner cable roller is designed with three rollers. In accordance with the requirement, multiple assembly sets can be combined together to form...

 Click for details

Model No. : 21221, 21231

Tri-roller Corner Ground Roller Assembly Our corner ground roller assembly is designed with three rollers. In accordance with the requirement, multiple assembly sets can be combined together to form arbitrary turning angle. The model with 'N'...

 Click for details

Model No. : 21305, 21321

Cable Protective Bend with Handle Protective Bend With Handle This cable protection bend

 Click for details

Model No. : 21171,21181,21191,21201

Best Quality Wire Pulling Sheave Cable Ground Roller (Cast Aluminum Support) Our cable ground roller comes with the cast aluminum support. The model with 'N' refers to the nylon roller, while the other presents the aluminum roller. Product Table...

 Click for details

Model No. : 21231~21234

Cable Protection Roller Cable Feeding Sheaves Our nylon rope guideing roller is suitable for the conductors with small section and small turning radius. and the nylon guide roller, The model with 'N' stands for nylon roller, and the others...

 Click for details

Model No. : 21241~21246

Split Lock Cable Roller for Lead Cable Split Lock Cable Roller for Lead Cable, trench feed roller,which can be placed at the orifice from arbitrary angle based on the traction requirement. Additionally, this nylon roller is lockable. Detailed

 Click for details

Model No. : 21311

Calble Entrance Protection

 Click for details

Model No. : 21312

 Click for details

Model No. : SL14

Cable Entrance Protective Sleeve Cable Entrance Protective Sleeve In separable hinged halves to guide the cable through the duct to avoid damage to both the Cable or the duct.The SL14 models avaiable fitted with roller for additional rope guidance...

 Click for details

Model No. : 21243

Cable Protection Roller Cable Feeding Sheaves Cable Protection Roller Cable Feeding Sheaves, our B series cable protection roller has single roller, which can be placed at the orifice from arbitrary angle based on the traction requirement, and...

 Click for details

Model No. : 21221

Triangle Corner Ground Roller with Nylon

 Click for details

Model No. : 21251

Three Rolles Radius Cable

 Click for details

Model No. : SL10

Draw Off Horizontal Pipe Cable Roller The SL10 Horizontal Pipe Cable roller, draw off roller, which leads the cable from the drum into the trench, the design is such that cable is supported over the full drum width prior to it being fed into the...

 Click for details

Model No. : 21221

Steel Buried Cable Roller for Pipe Laying Steel Buried Cable Roller for Pipe Laying, cable conveyor roller and straight line cable roller is designed with three rollers. In accordance with the requirement, multiple assembly sets can be combined...

 Click for details

Model No. : SL7

Heavy Duty Triple Corner Cable Roller The SL7 is a heavy duty Triple Corner Cable Roller, triple aluminum roller for use in most cable laying applications. These can be used singularly or linked together using Link Pins to form a full bend. All the...

 Click for details

Model No. : SH13

Cable Corner and Diversion Roller Nice Cable Corner and Diversion Roller, cable entry roller with steel pipe, tube roller, they are all heavy duty steel roller, each running in roller bearing and mounted in a heavy duty steel frame. Paint Finish...

 Click for details

Model No. : SL11

Lead in Cable Roller Guide Corner Roller The SL11 Lead In Cable Roller Guide Corner Roller, leads the cable from the drum into the jointbox/manhole or the winch bond out of the manhole,the steel beam roller has 2 angled hooks for location on the...

 Click for details

Model No. : SL2

Cable Protection Roller Cable Feeding Sheaves Zinc Plated Triple Corner Cable Roller, aluminum cable Corner Roller , and galvanized cable roller are for use in most cable laying applications. These can be used singularly or linked together using...

 Click for details